Αποστολή προς United Kingdom , USD
Κορυφαία θετική κριτική για %s στο Banggood, Αγοράστε τα καλύτερα %s με τη χαμηλότερη τιμή στο Banggood. Περιηγηθείτε στην πιο χρήσιμη θετική κριτική για το %s πριν αγοράσετε., παιχνίδια rc, διασκεδαστικά σπορ, μόδα, δημοφιλή ηλεκτρονικά
shawnz 30/11/2016
First off there were no instructions whatsoever in the frame kit. I assembled it by looking at the pictures on the Banggood site. I'm currently not able to complete the assembly because the flat plate doesn't fit into the 'L' brackets. This is nothing a little sandpaper or a file won't cure. The FPV camera verticle pieces are a tight squeeze put they pop into the top plate with just the right bit of force. These plates don't actually secure to the frame other than their friction fit. The horizontal posts / bottom plate of the gopro mount and of course the FPV camera keep the vertical pieces pinned in the top plate with the very bottom going into a slot in the bottom plate. The frame includes a Carbon fiber battery protector plate (not in the pictures) for the underslung battery. I'm replacing the included PDB with a Realacc HUBOSD 'X-type' for OSD and PDB. The LED board is included (see my tail light pic) I'll be building this up as a racer and I'm hoping for some longevity. I don't expect this to be an especially tough bird with only 4 standoffs but when you have such a small center section, what can you do? The hardware seems decent so far and the screw lengths are good. I love how light weight it is!
13
Σχόλια (2)
υποβάλλουν
  • Jonzkilz you think 110g is light weight? So did you get it assembled or not? In the picture it looks assembled

    Απάντηση 19/12/2016
  • shawnz It felt light at the time - lol. After stripping down a QAV-210 it's noticeably heavier but i'm hoping the 4mm plates top and bottom make it tough at least!

    Απάντηση 02/01/2017
Ερευνα ικανοποίησης

Κατεβάστε την εφαρμογή για να λάβετε ένα αποκλειστικό έκπτωση 10% από το κουπόνι